Tub-to-Shower Conversion Cost Calculator & ROI Estimator

Project Mode

Estimate ROI based on contractor-level project costs.

Project Details

Get quotes from 2–3 suppliers or big-box stores. If you received a lump-sum contractor quote, materials typically account for 35–50% of the total — ask for an itemized breakdown.

Get at least 2 contractor bids. Labor is usually 50–65% of total project cost. If your quote is a single lump sum, estimate labor at ~55% and materials at ~45% to split them.

Search "[your city] building permit fees" to find your local fee schedule. Most residential permits run $50–$500 depending on project scope. Call your building department if the schedule isn't online.

Check Home Depot or Lowe's tool rental for your ZIP code. Specialty tools typically run $50–$200/day. Many insulation blowers and similar tools are free to rent when you buy a minimum quantity of material.

A standard 10-yard dumpster rental runs $250–$450 for one week. For smaller loads, a single trip to a transfer station or dump typically costs $50–$150 including the disposal fee.

Use 10% for straightforward, predictable projects. Bump to 15–20% for older homes, any project that opens walls or floors, or work where hidden damage is possible.

Use your Zillow Zestimate, Redfin estimate, or county tax-assessment value as a starting point. For the most accurate figure, use a recent appraisal or your purchase price adjusted for local appreciation since purchase.

This calculator provides general estimates for educational purposes only and does not constitute financial, legal, tax, or real‑estate advice. All calculations are approximations and may not reflect actual project costs, market conditions, or home value changes.

By clicking Calculate Cost & ROI, you agree to our .

How long will it take?

How To Use This Calculator

  1. Measure the tub alcove dimensions: width (typically 60 inches), length (typically 32 inches for a standard alcove), and height to the ceiling. These dimensions determine the shower pan size, wall tile scope, and the length of required glass door or curtain rod.
  2. Specify the scope: remove tub and install a prefabricated shower unit (fastest — one-piece or multi-piece acrylic), or build a custom tiled shower in the existing alcove (highest quality, most time-intensive).
  3. Indicate whether the plumbing will be relocated. Converting from a tub/shower combo to a shower-only eliminates the tub spout and may change the valve height and showerhead position — plumbing relocation adds 2.0–4.0 hours to the estimate.
  4. In DIY mode, installing a prefabricated shower insert is highly accessible; custom tile work in a shower is the highest-skill wet-area application. See the shower-tile calculator for the tiling phase estimate.

Formula Breakdown

Every form input is listed below before the calculation steps. Project costs and DIY assumptions are separate so you can see exactly what changes when you switch project modes.

Project Details & Cost Inputs

These are the primary project variables from the Project Details form.

  • Materials Cost ($)Cost inputUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Labor Cost ($)Cost inputUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Permit & Inspection Cost ($)Cost inputUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Equipment Rental Cost ($)Cost inputUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Waste Disposal Cost ($)Cost inputUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Unexpected Cost Buffer (%)Quantity or planning assumptionUsed in: Project Cost (with Buffer), Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Current Home Value ($)Cost inputUsed in: Expected Home Value After Project.

DIY Cost Variables & Assumptions

These values are used only when DIY mode is selected.

  • Project ModeMode controlProfessional mode sets DIY variables to zero. DIY mode applies the values below and sets the DIY-mode flag to 1 where a formula uses it.
  • Estimated Project Hours ⏱️Quantity or planning assumptionTotal hours you expect to spend on this project. Drives your opportunity cost and supply calculations.Used in: Opportunity Cost 💼, 🍺 12-Packs of Beer Needed, Beer Budget, Total DIY Hidden Costs, Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Your Hourly Rate ($/hr) 💼Cost inputWhat your time is worth per hour. The hidden cost of DIY most people forget to count.Used in: Opportunity Cost 💼, Total DIY Hidden Costs, Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Beers Per Hour 🍺Quantity or planning assumptionDemo, plumbing, and tile all in one project. We'll calculate 12-packs at $15 each.Used in: 🍺 12-Packs of Beer Needed, Beer Budget, Total DIY Hidden Costs, Total Cost, Net Gain / Loss, Return on Investment (ROI).
  • Buddies Helping You 🍔Quantity or planning assumptionEvery buddy deserves burgers. We'll calculate how many 6-packs of patties at $10 each.Used in: 🍔 Burger 6-Packs Needed, Burger Budget, Total DIY Hidden Costs, Total Cost, Net Gain / Loss, Return on Investment (ROI).

Calculation Steps & Results

The calculator applies these formulas in sequence using the inputs shown above.

  1. National Avg. Value Increase (Tub-to-Shower)4000This result is shown as a dollar amount.
  2. Expected Home Value After ProjectCurrent Home Value ($) + 4000This result is shown as a dollar amount.
  3. Project Cost (with Buffer)(Materials Cost ($) + Labor Cost ($) + Permit & Inspection Cost ($) + Equipment Rental Cost ($) + Waste Disposal Cost ($)) × (1 + Unexpected Cost Buffer (%) ÷ 100)This result is shown as a dollar amount.
  4. Opportunity Cost 💼Your Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️This result is shown as a dollar amount.
  5. 🍺 12-Packs of Beer Neededceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12)This intermediate result feeds the calculator’s final comparison.
  6. Beer Budgetceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15This result is shown as a dollar amount.
  7. 🍔 Burger 6-Packs Neededceil(Buddies Helping You 🍔 × 2 ÷ 6)This intermediate result feeds the calculator’s final comparison.
  8. Burger Budgetceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10This result is shown as a dollar amount.
  9. Total DIY Hidden CostsYour Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️ + ceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15 + ceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10This result is shown as a dollar amount.
  10. Total Cost(Materials Cost ($) + Labor Cost ($) + Permit & Inspection Cost ($) + Equipment Rental Cost ($) + Waste Disposal Cost ($)) × (1 + Unexpected Cost Buffer (%) ÷ 100) + diyMode × (Your Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️ + ceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15 + ceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10)This result is shown as a dollar amount.
  11. Net Gain / Loss4000 − ((Materials Cost ($) + Labor Cost ($) + Permit & Inspection Cost ($) + Equipment Rental Cost ($) + Waste Disposal Cost ($)) × (1 + Unexpected Cost Buffer (%) ÷ 100) + diyMode × (Your Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️ + ceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15 + ceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10))This result is shown as a dollar amount.
  12. Return on Investment (ROI)(4000 − ((Materials Cost ($) + Labor Cost ($) + Permit & Inspection Cost ($) + Equipment Rental Cost ($) + Waste Disposal Cost ($)) × (1 + Unexpected Cost Buffer (%) ÷ 100) + diyMode × (Your Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️ + ceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15 + ceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10))) ÷ ((Materials Cost ($) + Labor Cost ($) + Permit & Inspection Cost ($) + Equipment Rental Cost ($) + Waste Disposal Cost ($)) × (1 + Unexpected Cost Buffer (%) ÷ 100) + diyMode × (Your Hourly Rate ($ ÷ hr) 💼 × Estimated Project Hours ⏱️ + ceil(Beers Per Hour 🍺 × Estimated Project Hours ⏱️ ÷ 12) × 15 + ceil(Buddies Helping You 🍔 × 2 ÷ 6) × 10)) × 100This result is shown as a percentage.

How the Estimate Works

The tub-to-shower conversion cost analysis starts with the direct project inputs, groups them into cost subtotals, adds contingency or other modeled overhead, and then compares the resulting investment with the value or savings inputs. ROI, payback, net gain, and related outputs are calculated from that same cost-and-value model rather than from a generic percentage.

  • Cost build: Project Cost (with Buffer), Opportunity Cost 💼, Total DIY Hidden Costs, Total Cost, Return on Investment (ROI).
  • Value and return: National Avg. Value Increase (Tub-to-Shower), Expected Home Value After Project, Net Gain / Loss, Return on Investment (ROI).
  • Use the formula breakdown above to see which entered values drive each subtotal and final result.

The estimate covers tub removal (2.0 hours including drain disconnection, demolition, and debris removal — cast iron tubs require cutting into sections), subfloor inspection and repair if needed (0.5–2.0 hours variable), drain relocation if required (2.0 hours), prefab unit installation (3.0 hours for a multi-piece insert including level, caulk, and trim), or custom shower base pan installation and waterproofing (4.0 hours for a mortar-bed pan) followed by the tiling scope. Drywall repair in the alcove after tub removal adds 1.5 hours.

Cast iron tub removal is the most physically demanding phase of a tub-to-shower conversion. A standard cast iron tub weighs 250–400 pounds and must be removed in sections using a cold chisel and demolition hammer — a full-day effort for one person. Fiberglass and acrylic tubs can be cut into sections with a reciprocating saw and removed much more quickly.

Benefits of Using This Calculator

  • Creates a transparent starting point for planning a tub-to-shower conversion project instead of relying on a single unexplained guess.
  • Shows how individual assumptions affect the result, making it easier to spot unrealistic inputs and test alternatives.
  • Supports conversations with contractors, suppliers, or household decision-makers by putting the key assumptions in one place.
  • Can be reused as quotes, quantities, or project scope change, so your estimate stays useful throughout planning.

Factors That Affect Your Results

  • Project scope and quantities: the values entered for Materials Cost, Labor Cost, and Permit & Inspection Cost can move the estimate substantially.
  • Material, equipment, and disposal choices: product grade, availability, waste, delivery, and rentals can change the total.
  • Labor and regional pricing: contractor rates, local demand, access, permits, and code requirements vary by location.
  • Unknown conditions and changes: site access, repairs discovered during the work, weather, and scope changes can add time or cost.

Key Concepts Explained

Return on investment (ROI)

The estimated value recovered relative to project cost. It is a planning estimate, not a guaranteed financial return.

Payback period

The modeled time or value threshold needed to recover the project investment under the calculator’s assumptions.

Estimated cost

The modeled material and labor total for tub-to-shower conversion before actual quotes, site conditions, and final scope are known.

Related Calculators

Data Sources

  1. Remodeling Magazine — Cost vs. Value Report (2019–2024)Annual national survey of contractor costs and resale value recovered for common remodeling projects. Used as the primary benchmark for value-increase estimates in this calculator.
  2. National Association of Realtors — Remodeling Impact Report (2019–2024)NAR survey data on the appeal and value recovered from home improvement projects as reported by real estate professionals and homeowners nationwide. Used to corroborate resale value estimates.